Technician’s Choice® TEC591 Matte Finish Ceramic Detail Spray – 16 oz

Maintain the appearance of matte paint and vinyl wraps with Technician’s Choice® TEC591 Matte Finish Ceramic Detail Spray. Developed for easy application and a streak-free finish, this ceramic detail spray adds a sacrificial layer of surface protection while enhancing depth of color and slickness without adding gloss.

TEC591 can be used on wet or dry vehicles and is suitable for most exterior surfaces, including plastic trim, chrome, moldings, and wheels. Its spray-and-wipe application makes it a practical option for maintaining a protected matte finish.

For the first application, wash and dry the vehicle and test the product in an inconspicuous area to confirm the resulting appearance before treating the remaining surfaces.

Product Features

• Formulated for matte paint finishes and vinyl wraps.
• Enhances depth of color without adding gloss.
• Adds ceramic surface protection and slickness.
• Developed for easy application and a streak-free finish.
• Suitable for wet or dry vehicle application.
• Can be used on most exterior surfaces, plastic trim, chrome, moldings, and wheels.

Directions for Use

1. For the first application, wash and dry the vehicle.
2. Test a small amount in an inconspicuous area and check the resulting appearance.
3. Apply a few sprays to one panel.
4. Use one microfiber towel to lightly distribute the product over the finish.
5. Use a second microfiber towel to wipe the panel to a uniform protective layer.

What’s Included

One 16 fl oz bottle with trigger sprayer, as pictured. Microfiber towels are needed for application.

Handling & Storage

Do not allow product to freeze. Keep the container tightly closed and upright in a dry, well-ventilated location. Avoid skin and eye contact and breathing mist or spray. The SDS recommends protective gloves and safety glasses.

Warning: May cause damage to organs through prolonged or repeated exposure. Read the product label and SDS before use.